Waves Scheps Omni Channel User Manual

Scheps Omni Channel / User Guide
35
Bell-shaped EQs
There are two Bell EQ sections in the middle of module: Mid and Tone. Both have three shape options: Wide,
Narrow, and Parametric.
The Mid and Tone sections are identical in the Narrow and Parametric modes.
When the Wide bell shape is selected, the character of the two EQs diverges.
• Mid is a relatively wide, clean filter, best suited for enhancing the characteristic sound of the source.
• Tone is a bit narrower and can really help a source pop out of the track without too much EQ. Since it’s somewhat
smeary, it’s good for coloring and gluing a track together.
Mid and Tone Controls
Gain
Adjusts the gain of the bell.
Range: -18 dB to +18 dB
Frequency
Sets the center frequency of the bell filterl
Range: 20 Hz to 20 kHz
EQ filter type
Selects the shape of the bell filter.
Range: Wide, Narrow, Parametric (In the Parametric mode, the Q control is available for adjusting the width of
the bell.)
Q (parametric mode only)
Range: 0.2 to 10

Waves Scheps Omni Channel Specifications

General

Brand	Waves
Model	Scheps Omni Channel
Category	Recording Equipment
Language	English