Scheps Omni Channel / User Guide
Sidechain filters
Click on the SC button to open the Expanded view for sidechain adjustment. Hold Ctrl and drag vertically over the Frequency
control to easily isolate a desired frequency.
External sidechain On/Off
Range: off or on
HP/LP sidechain filters
HP Range 20 Hz to 15,000 Hz
LP Range: 20 Hz to 15,000 Hz
Link HP and LP filters
Allows you to keep the bandwidth between the HP and LP filters, but use either knob to sweep the frequency spectrum. This
essentially turns the HP and LP filters into a band pass filter.