Wavetronix SmartSensor Matrix - Chapter 4 - Installing SmartSensor Manager Matrix; Installing SSMM Software

In this chapter
 Installing SSMM
 Microsoft .NET Framework
4
e SmartSensor Manager Matrix (SSMM) soware enables you to congure and interact
with the SmartSensor Matrix. SSMM can be run on any Windows-capable device up to and
including Windows 8.
Note
Windows RT, found on many new Windows tablets, is distinct from Windows 8 and
will not run SmartSensor Manager Matrix.
e soware can be downloaded on other computers by going to www.wavetronix.com.
is chapter explains how to download and install the SSMM soware.
Using the Click 421
e Click 421 converts wired or wireless serial data to RS-485 communication and sends
it to all devices on a shared multi-drop communication bus on the backplate. is allows
control of all SmartSensor Matrix units from a single access point.
You can make a wired connection using a USB-to-serial converter and a USB adapter cable;
alternatively, you can make a wireless connection using a precongured Bluetooth link. A
whip antenna can be attached to the Click 421 to increase the distance and reliability of the
Installing SmartSensor
Manager Matrix 4