8
• Alert messages via serial port and/or Ethernet , using a variety of protocols, including:
o COMP1
o COMP2
o Inovonics central receiver
o Messaging Client (browser based messaging)
o R5000 (Rauland Responder
tm
5000)
o SMTP
o TAP
o HTTP
RMS can be configured to detect alert activation using the above types of data inputs, and also using the
following methods:
• WaveTrac sensor related events delivered through WaveTrac Tracking/Control devices,
including proximity, wander proximity, caregiver call, and exit risk
• Contact closure events at WaveTrac Tracking/Control devices
RMS can output information via the following methods:
• Responder 5000 Messaging App (Android)
• Alert Client (browser based alerting)
• Digital TV, using HDMI port and the Digital Alert Viewer (DAV) protocol
• On-Site Radio Pagers, using a radio paging system, and Ethernet or serial port protocols,
including:
o TAP
o COMP2
• Walkie Talkies, using an Audio Gateway Device with Ethernet and Radio Interface
• E-mail
• Adaptive LED display model 4080 RGB MNS, via Ethernet
RMS reports can be delivered via schedule or generated manually. A MySQL based third party reports
API is also available.
RMS has two main operating modes: a Base mode, and a Base Mode plus Event Processing Mode (See
Fig. 1 below). The Base mode of operation includes:
• Device drivers (interface protocols)
To Next Page
Loading...