Cool Top Trail 20/24 11
1
2
3
2
Fig. 19: Fixing the air distributor to the ceiling
NOTE
This step is optional. The purpose of these
screws is only to close a potential gap be-
tween the air distributor and the ceiling of
the vehicle.
X Fix the air distributor (1) to the ceiling using 4 coun-
tersunk head screws (3).
X Insert the air filters (2) in the air distributor.
4.12 Holder remote control
1
2
Fig. 20: Holder remote control
X Install the holder (1) for the remote control in a con-
venient location, using 2 countersunk screws (2).
4.13 System test
X Test all air conditioner functions as described in
chapter 5.
X Ensure that the condensate outlets are clear after in-
stalling the outdoor unit.
X Enter the new vehicle height and weight in the vehi-
cle documents if required.
X Hand this manual over to the vehicle owner.
More information https://www.caravansplus.com.au
To Next Page
Loading...
