Webasto SVS300 User Manual

SVS-200 Installation, Operation and Maintenance
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
20153-W-03-01 19 Webasto Charging Systems, Inc.
Figure 5- 7 Fault/Warning Log Data Screens
5.7 Charge Event Log
The charge event log data screens (see Figure 5- 8) allow the user to review the data from the
last 250 fast charge or equalization events performed by the charger. These data are stored in
the charger and are preserved even if power is removed from the charger.
1. Event ID screen - Shows the active (most recent) charge event. Using the UP and DOWN
arrow keys the user may scroll through the last 250 charge events. For each charge event,
the BMID number will be displayed to help the user locate a particular charge event. Once
the desired event is displayed, press ENTER to open the log for that event. Press CLEAR at
any point in the log to return to the Event ID screen.
2. Battery state screen - Shows the beginning and ending voltage, beginning and ending current,
and beginning and ending states of charge (SOC) for the selected charge event.
3. Charge date screen - Shows the date and time recorded at the beginning and end of the
selected charge event.
4. kWhrs Returned – Shows the cumulative kWhrs returned to the battery during the selected
charge event.
Fault/Warning Log
Fault Event 1
12:29 02/06/07
Warning Code: 119
BMID TempSensr Fail
Log entry blank
Fault Event 2
12:20 02/06/07
Fault Event 3
23:23 02/04/07
Cleared
12:30 02/06/07
Idle
at time of fault
ENTER
CLEAR
ENTER
Fault Event n
Log entry blank
ENTER
CLEAR
CLEAR
CLEAR
CLEAR
There are 50
Fault events
in a log
To top level screens
1
2
3
4

Webasto SVS300 Specifications

General

Brand	Webasto
Model	SVS300
Category	Battery Charger
Language	English