Webasto Thermo Top C - Page 20

20
Peugeot 207 / 207 SW / 207 CC
5FW/X/Y - Variant B
Align heater. Ensure sufficient distance from
neighbouring components, especially from
cooler hose. Correct if necessary. Tighten
Ejot screws.
1 M6x20 bolt, flanged nut on prepared strut
2 52 mm dia. rubber-coated p-clamp
Mounting
heater
Diesel
Tighten EJOT screws to 10 Nm.
Insert two washers between heater and
bracket at position
2.
1 Ejot screw [2x]
2 Ejot screw
Mounting
heater
33
21
34
1
1
2