EasyManua.ls Logo

Weber mt CR 2 - Compacting and Shutting Down; Compacting Safety Cautions; Compacting Operation; Switching Off the Engine

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
ATTENTION
Danger of material damage or excessive wear if V-belt slips
through.
Operate the machine only in full-throttle mode.
CAUTION
Risk of injury if the machine is guided improperly.
Guide the machine safely with both hands on the handle.
CAUTION
There is a crushing hazard between the machine and
the wall during work in close proximity to walls.
Use extra caution when working close to obstacles
Compacting
Start the engine.
Bring the gas lever into the full-throttle position.
Switch between forward and reverse travel by setting
the handle to the corresponding direction.
Switching o󰀨 the engine
Bring the gas lever into the idle speed position.
Press the switch-o󰀨 button (4).
The forward and reverse travel of the machine
is innitely variable.
The speed of the machine is selected with
the corresponding deection of the handle

Other manuals for Weber mt CR 2

Related product manuals