Weber mt CR 2 - Engine Oil Maintenance; Checking Engine Oil Level; Changing Engine Oil

21
1
1
WARNING
If lubricating oils and fuel come into contact with skin,
they can cause skin cancer.
Wear protective gloves.
If skin contact has occurred, wash the a󰀨ected areas
thoroughly.
8.2.3. Check the engine oil level
Park the machine on a horizontal subsurface.
Switch o󰀨 the engine and wait for several minutes until
the oil has collected in the crankcase.
Unscrew the oil dip stick from the crankcase.
Wipe o󰀨 the oil dip stick with a clean cloth.
Screw the oil dip stick back into the crankcase.
Unscrew the oil dip stick from the crankcase.
The correct oil level is between the “min.” and the “max.”
marks.
When the oil level reaches the “min.” mark, ll in fresh oil
in accordance with the specication.
8.2.4. Change the engine oil
CAUTION
Danger of burn injuries at the hot engine and its attachments.
Allow the combustion engine to cool down su󰀩ciently before
starting work.
Use extra caution during work on the engine when it is at
operating temperature.
Start the engine and allow the engine to warm up for
a few minutes.
Switch o󰀨 the engine.
Unscrew the oil dip stick (1). It also serves as the seal
for the oil ller neck.
Place a suitable collection vessel under the oil drain.