Weber mt CR 2 - Maintenance Operations Details; Cleaning the Air Filter; Checking the V-belt

20
1
2
1
2
8.2. Description of the maintenance operations
8.2.1. Clean the air lter
Unscrew the air lter cover (1).
Remove the knurled nut on the air lter.
Remove the air lter insert (2).
Blow out the air lter insert from inside to outside
with compressed air.
Check and, if necessary, replace the air lter cartridge.
Tighten the air lter cartridge using the knurled nut
Screw on the air lter cover.
Shut down the machine.
Remove the V-belt guard (1).
Check the V-belt (2) for cracks and wear.
Replace the V-belt if it shows signs of extensive wear or
other damage.
Fit the V-belt guard.
8.2.2. Check V-belt