WEG W22Xdb - Sleeve Bearings

46 | Flameproof motors
www.weg.net
8.2.10. SLEEVE BEARINGS
Figure 8-4 - Sleeve bearing assembly
1) Drain plug;
2) Bottom half of the bearing housing;
3) Motor endshield;
4) Fixing bolts;
5) Top half of the bearing housing;
6) Bearing housing cap split line bolt;
7) Lifting eyebolt;
8) External cover bolts;
9) External cover;
10) Bearing liner – bottom half;
11) Bearing liner – top half;
12) Oil ring;
13) Oil inlet;
14) Connection for temperature sensor;
15) Oil sight glass or oil outlet for circulating oil
system
16) Tapped hole for oil sump temperature
measurement;
17) Stationary baffle bolt;
18) Labyrinth seal carrier (outboard);
19) Labyrinth seal carrier (inboard) – bearing –
housing;
20) Breathing device (Ex certified).