Weichai America Corp.
26
2. Clean the upper surface of the cylinder head. Install cylinder head cover gaskets.
3. Clean and install cylinder head cover.
4. Install the bolts and fasten. The required torque is 10~15Nm.
2.10.4 Cylinder Head Cover Inspection and Maintenance
Key point 1:
Assembling
Cylinder head cover gaskets are disposable, and should be replaced during maintenance.
Key point 2:
Inspection
(1) Check the covers for any cracks or other damage. Replace if damaged.
(2) If there is leakage through the cylinder head cover gaskets, then all gaskets should be checked
and replaced
2.11 Lifting Lugs Assembly and Disassembly
2.11.1 Lifting Lugs Exploded View
Fig. 2-21 Exploded view of lifting lugs
To Next Page
Loading...
