Weichai America Corp.
8
Disassembling:
Use dedicated tool to disassemble the camshaft sleeve, and try to protect other sleeves during
disassembling.
Inspection:
Before assembling, grease on sleeve back, bush surface and fitting hole inner surface must be
wiped out, and make sure there is no burr, overlap and scrap iron.
Assembling:
Apply oil on engine block hole, put camshaft sleeve into the dedicated tool and guide it into
engine block, in the meantime align oil gallery holes on the sleeve and engine block.
Key point 3:
Assembly: Install the greased seal ring to the welded elbow, insert the elbow into the
corresponding hole, and fix it on the engine block by using a fixing plate, hexagon socket bolts
and spring washers.
2.2 Steps to Assemble and disassemble Engine Block Module
2.2.1 Exploded View of Engine Block Module
To Next Page
Loading...
