BEFORE YOU BEGIN
Thank you for selecting the versatile WELDER• PRO
4100 weight system. The PRO 4100 weight system
offers a selection of weight stations designed to devel-
op every major muscle group of the body. Whether
your goal is to tone your body, build dramatic muscle
size and strength, or improve your cardiovascular sys-
tem, the weight system will help you to achieve the
results you want.
For your benefit, read this manual carefully before
using the weight system. If you have additional
questions, please call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m.
until 7 p.m. Central lime (excluding holidays). To help
us assist you, please note the product model number
and serial number before calling. The model number is
831.159820. The sadal number can be found on a
decal attached to the weight system (see the front
cover ofthis manual).
Before reading further, please review the drawing
below and familiadze yourself with the parts that are
labeled.
ASSEMBLED
DIMENSIONS:
Height: 77 in.
Width: 81 in,
Length: 59 in.
Butterfly
/Press Arm
Ab Pulley
Station
Backrest
Warning Decal 2
(One on each side
of the right updght.)
Left Side
I_atBar
gh Pulley Station
ig
Decal 1
Backrest
Seat
Right Side
Leg Press
Plate
Weight
Leg
__ Low Pulley
Station
Note: The terms "right side" and "left side" are determined I'el-
ative to a person facing away from the weight system; they do
not correspond to right and left in the pictures in the manual.
Foot Plate
4
To Next Page
Loading...
