To Next PageTo Next Page
Need help?Do you have a question about the Weidmüller STRIPAX and is the answer not in the manual?
General| Brand | Weidmüller |
|---|---|
| Model | STRIPAX |
| Category | Tools |
| Language | English |
The tool is designed for stripping cables. Only use the tool for the work described.
Do not work on live parts. Cover and block off live parts in the vicinity of your workplace.
The tool must be checked regularly. Repairs must only be carried out by the manufacturer.
Tool results may vary according to insulation material properties. Contact manufacturer for questions.
Adjust the cutting depth to match the cable insulation thickness for optimal stripping.
Use the wire stop mechanism for consistent stripping length. Press down and then adjust.
The process of removing insulation from cables using the tool.
Suitable for cutting flexible and solid-core wires. Not for steel stranded wires.
Feature to prevent unintentional cutting of cables.
Instructions and limitations for performing partial stripping operations.
Adjusting the grip for comfortable hand size.
Individualised labelling possible with ESG-9-20 device markers.
Additional adjustments are possible for the STRIPAX 16 model.
