上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
45 / 116
4.1.5.2 Data Chart Area
Click the System tab to access this area. Click the pull-down menu in the chart upper right
corner to switch between the following charts:
Calibration Data
Mapping between the cutter/material capacitance and position during auto-
calibration of the cutter is displayed here.
X axis: capacitance; Y axis: distance between the cutter and material
Real-time Cpt
Real-time capacitance changes during a period of time are displayed here.
To Next Page
Loading...
