Tools and Test Equipment 29
11. Tools and Test Equipment
Following is a list of tools and test equipment men-
tioned in these Service and Repair Instructions.
See the relevant chapter for details of the tools and
test equipment needed in each case.
Special tools can be obtained from the
manufacturer, Weinmann.
• Cross-head screwdriver, size 1
• Cross-head screwdriver, size 2
• Pliers
• Vacuum test pressure gage set WM 15294
12. Technical Changes
Technical change From Device No. Date
Reinforced release catch 2117 09.11.98
Software update Version 3.0 4500 22.08.00
New holder for release catch 6730 16.07.01
Case reinforced, use of washers discontinued 8105 20.11.01
Printed circuit board with radio suppression 9145 07.06.02
Vacuum pump without side walls 10048 22.10.02
Appliance plate with e1 mark 13445 28.06.04