Weinmann ACCUVAC Rescue WM 10600 - 5. Operating and Display Elements; 5.1 Operation; 5.2 Service

8 Operating and Display Elements
5. Operating and Display Elements
5.1 Operation
5.2 Service
Bring up service display by pressing keys –0.2 and –0.3 simultaneously.
Main switch Keys for desired
suction level
Capacity
indicator
Adequate external
voltage available
Membrane
keyboard
Power pack was
discharged down to
discharging limit
voltage.
Charging was
terminated due to
incorrect temperature
of power pack.
Charging was
terminated due to
power pack
overvoltage.
Charging was
terminated due to
maximum charging
time being exceeded.
Charging was
terminated.
A new power pack
was installed. Its
capacity is unknown.
The last charging
operation was
successfully completed.
Initialize power pack
(if LED flashing).
Main switch Press
simultaneously
to initialize
power pack.
Press
simultaneously
for service
display.
Adequate
external voltage
available.
Membrane
keyboard