Problems during cleaning
Problem Possible cause Required response
Black spots inside the oven cavity Wrong cleaning agent
■
Use ConvoClean forte for fully auto-
matic oven cleaning with canisters
■
Use ConvoClean forte S for fully au-
tomatic oven cleaning with single-
measure dispensing
■
Use ConvoClean forte or
ConvoClean new for semi-automatic
oven cleaning
The water is too hard Adjust the water hardness; see 'Techni-
cal Data' in the installation manual
Poor cleaning results The wrong soiling level has been set Select a higher cleaning level
The wrong cleaning agent was used
■
Use ConvoClean forte or
ConvoClean new for fully automatic
oven cleaning with canisters
■
Use ConvoClean forte S or
ConvoClean new S for fully automat-
ic oven cleaning with single-measure
dispensing
■
Use ConvoClean forte or
ConvoClean new for semi-automatic
oven cleaning
What to do in the event of a power outage
During a cooking sequence:
■
After a power outage, the cooking process will be automatically resumed if the downtime is shorter than five minutes.
This will prevent bacterial growth in the food.
During a fully automatic cleaning sequence:
■
After a power outage, the cleaning process will be automatically resumed in a defined state. Automatic safety rinsing will
be carried out so that no cleaning agent mixture will remain in the oven cavity
.
■
If the sequence is manually cancelled, you will need to rinse the oven cavity manually.
6 How to Perform Maintenance on the Combi Oven
Operating Manual 110
To Next Page
Loading...
