Welbilt Convotherm 4 - Page 15

No. Designation Function
8
Oven cavity Is where food is placed while it is being cooked
9
Integrated preheat bridge in unit
door
Works as a safety element during pre-heating and reduces energy losses
10
Loading trolley Used to hold standard-size bakeware
11
Loading trolley handle
■
Bar used to move the loading trolley
■
Can be removed
12
Condensate collecting tray on
loading trolley
Collects liquids and condensate dripping from the oven cavity
13
Recoil hand shower
(not included in certain units)
■
Meant exclusively for rinsing the oven cavity with water
■
Is retracted automatically into its holder after being used
■
Antibacterial ("HygieniCare")
14
Core temperature probe, option-
al sous vide probe (can be exter-
nally inserted)
Used to measure the food's internal temperature
15
Oven light
■
Illuminates the oven cavity
■
Program-controlled
16
Nameplate Used to identify the unit
Parts and functions for special locking feature (security model only)
The figure below shows a special locking feature for enhanced security on a size 6.10 combi oven used as an example
representing all unit sizes:
No. Designation Function
1
Lockable operating panel cover The cover can be swung in and secured onto the unit case so that it covers the
operating panel, preventing unauthorized users from operating the combi oven.
2
Padlock
■
Used to secure the operating panel cover onto the unit case
■
Not included
3
Padlock
■
Used to secure the unit door onto the unit case
■
Not included
4
Unit door hasp Features two different slots that can be used to lock the unit door in order to
prevent unauthorized users from opening and closing it
Unit door action:
■
If the unit door is locked using the upper slot, the door will always be fully
closed.
■
If the unit door is locked using the lower slot, it will be possible to open the
door to its cracked-open position
2 Configuration and Functions
Operating Manual 15