3.
■
Put the new
, full canister (1) containing cleaning agent in place.
■
Insert the (red) supply tube, together with the wand (2), into the full
canister (1) and screw it in place.
■
Make sure that the tube is routed without any kinks and that the vent
opening on the canister's cap is open and clear.
4.
■
Check to make sure that the canisters are set up correctly:
■
The canisters' supporting surface must not be higher than the
edge where the feet and the unit case meet.
■
The canisters' supporting surface must not be more than 3 feet
below this edge.
■
Check to make sure that the tube is connected to the right connec-
tion.
■
The cleaning agent must go to unit connection G.
(indicated by a red color).
5 How to Clean the Combi Oven
Operating Manual 99
To Next Page
Loading...
