Welbilt MERRYCHEF eikon e2s - Page 44

Merrychef eikon
®
e2s service and repair manual
44
_______________________________________________________________________________________________________________________________
_______________________________________________________________________________________________________________________________
5 Service information
Back to contents >
Functions of the service mode
1. Check the "Error log" for details of
any logged appliance errors. (Log
also includes non-error events).
2. Check the "Oven counters" to find
the usage of components and the
controls area temperature within
the cabinet.
3. Check the operational
performance of the main
components using "Visual view".
5. Check the “Temp. Comp.” to
enter the oven cavity temperature
calibration mode.
6. Use the ‘down’ arrow to access
more options.
4. Check the “Demo Mode” to
switch between normal operation
and demonstration only operation.
7. Check to perform the tests of
your microwave combination oven
as described in the “Testing
selected components”, section 5.6
of this manual.
If required, refer to the “Replacing
components” with section 6 for
any repairs needed before
continuing with the tests. Use the
up arrow to return to the previous
screen.
8. Follow the procedures under
“Recommissioning test”, section 5.7
before commissioning your
appliance for use. These tests should
be completed after all repair and
maintenance procedures
9. Use the ‘up’ arrow to access
previous options.
10. The return (backspace) arrow will
exit the service screens.