EasyManua.ls Logo

Welbilt MERRYCHEF eikon e2s - Moving the Appliance; Working Safely with the Appliance

Welbilt MERRYCHEF eikon e2s
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Merrychef eikon e2s Quick Start Guide
Part Number 32Z3922 CE, GBR Issue 02 06/2018
Cleaning the oven and oven parts
1. Open the appliance door and remove the cook plate/wire
rack and any other cooking vessels from the cavity.
CAUTION: Wear protective glasses and protective rubber
gloves during the cleaning procedure.
2. Wash all removed oven parts in warm soapy water.
Wash off using a clean cloth and plenty of clean, warm water.
Dry all components using a fresh, clean cloth.
3. Remove any spillages with suitable cloth or paper towel.
Use a dry clean brush to remove any food particles from
between the cavity oor and the inside of the front door.
4. Carefully spray Merrychef cleaner or a Merrychef approved
cleaner onto a sponge.
Clean all surfaces of the cavity excepttheroof(jetplate)
and door seal.
NOTE: Do not spray directly into the cavity.
5. For difcult areas, leave to soak for 10 minutes with the
appliance door open.
Use a non-abrasive nylon scrub pad/sponge to clean all
surfaces of the cavity and the inside surface of the appliance
door.
NOTE: Do not scrub the roof (jet plate) or door seal or use
metallic scourers.
6. Wash off all surfaces using a wet clean cloth.
Dry using a fresh, clean cloth or paper towel.
If required the cavity roof and door seal can be wiped clean
with a wet clean cloth as well.
1
3 4
5 6
2

Other manuals for Welbilt MERRYCHEF eikon e2s

Related product manuals