CM2P201 User Guide
CMP201 has an embedded gigabit switch inside the chassis. You can use it as a switch to
connect other devices together. The four network ports are respectively used for management and
data transmission .From left to right, port 1 and port 2 are used for management, port 3 and port 4
are used for data transmission.A good method of checking IP output is to play the IP streams using
VLC player directly.
If you want to connect a switch between CMP201 and PC or other devices, this switch should
support IGMP V2 and IGMP snooping function. If the switch you used is not configured properly, it
could cause some network issue.
4.1.2 Logging into the Web GUI
Enter the CMP201 Baseboard IP address into the URL field of any recommended browsers (IE8 or
later, Firefox, and Google Chrome) to access the login page. The default user name and password
are both admin. Click Login to log into the GUI.
To Next Page
Loading...
