CM2P201 User Guide
4.3 System Setting
Click the System Setting on the top right corner to enter the system setting page where you can find
Network, Time Setting, System Manage and Password.
System Setting> Network
In Network page you can assign a static IP address to CMP201’s baseboard. Click the Apply button
on the right side to make the change take effect.
Note to avoid IP conflict when you set the baseboard IP address, The occupied IP section will be
displayed in this page on the top blue area.
System Setting> Time
In Time page you can see the current system time, change Time Zone, choose system time Mode
(Manual or Automatic), enable/disable Auto Sync and modify NTP Server Address in Automatic
mode or change the current system Time in Manual mode. Click the Apply button on the right side to
make the change take effect.
Automatic mode
To Next Page
Loading...
