CM2P201 User Guide
Click Apply or Clear Config button on the right side to make the changes made take effect or clear
all configuration.
Scanning Time(ms)
：
1000~5000. Please try to increase this value if service name is not present,
while it will slow down scanning process.
CR2-DVS2FTA-01 > IP Output
This feature enables you to output S2 services directly without involving baseboard processing. No
baseboard resources will be consumed in this way.
IP Output > Status> This page shows detailed status of each channel. The TS Analysis and Service
List here have the same function to those on the Status page. See the image below for reference.
To Next Page
Loading...
