To Next PageTo Next Page
Need help?Do you have a question about the Wen 40421 and is the answer not in the manual?
Explains danger, warning, or caution symbols used in the manual.
Guidelines for maintaining a safe and clean work environment.
Precautions related to power tools and electrical hazards.
Recommendations for operator alertness, PPE, and attire.
Proper usage, maintenance, and storage of power tools.
Guidelines for safe charging, handling, and storage of batteries.
Instructions for qualified repair and use of replacement parts.
Defines the intended use and limitations of the pole saw.
Key safety practices for operating the pole saw.
Warnings about operating near power lines and electrical shock.
Emphasizes using two hands, supervision, and proper stance.
Explains kickback and provides methods to minimize its occurrence.
Safety precautions for charging and handling batteries and chargers.
Further safety rules for battery use, storage, and disposal.
Environmental considerations and proper care for lithium-ion batteries.
Guidelines for maintaining and using the battery charger safely.
Information on polarized plugs and the use of GFCI protection.
Recommendations for selecting and using extension cords with the tool.
Describes the function and identifies the main parts of the pole saw.
Instructions for filling the automatic oil reservoir for chain lubrication.
Steps for removing, charging, and storing the battery pack.
Procedure for inserting and removing the battery from the tool.
Detailed steps for assembling the guide bar and saw chain.
Instructions on how to properly tension the saw chain for safe operation.
Importance of saw chain oil and how to lubricate it.
Steps to extend and secure the telescoping handle.
Essential pre-operation checks for safe working conditions.
Critical safety advice for operating the pole saw.
Explains kickback and how to avoid it during operation.
Instructions for turning the tool on and off.
How to adjust the angle of the saw head.
Best practices and methods for sawing branches.
Steps for cleaning the tool and its components.
How to verify the functionality of the automatic oiling system.
Guidelines for proper storage of the battery and charger.
General
