SPECIFIC SAFETY RULES FOR POLE SAWS
WARNING: Do not let comfort or familiarity with the product replace strict adherence to
product safety rules. Failure to follow the safety instructions may result in serious personal injury.
6
1. TOOL PURPOSE. The purpose of this pole saw is for limbing trees and cleaning up branches. Do not
push it beyond its limits or its capacities. Using the pole saw in a way for which it was not designed
can result in serious injuries, machine damage and voiding of the warranty. Only use with WEN 40V
Max Lithium Ion battery 40401.
2. Hold the pole saw by the insulated gripping surfaces only. If the pole saw contacts a live wire, the
exposed metal parts of the pole saw may become live and could cause electric shock. Hold the pole
saw with two hands to avoid loss of control.
3. Keep all parts of the body away from the saw chain. The saw chain continues to move after the
switch is turned off. Allow the saw chain to completely stop before clearing jammed material.
4. Keep bystanders, especially children, at a safe distance away from the saw during operation.
5. Wear eye and hearing protection. Other personal protection equipment for the head, hands, legs and
feet is recommended especially when using the pole saw overhead. Falling debris can result in serious
injury.
6. Do not operate the saw while sitting or standing in a tree. Maintain a safe, secure stance at all times.
Only use the saw when standing on solid, safe and level ground.
7. Use particular caution when cutting brush and young trees. The thin material may get caught in the
chain and hit you or throw you off balance.
8. Carry the switched-off pole saw using the handle with the chain pointing away from your body. Al
-
ways put on the protective cover when transporting or storing the pole saw. Carefully handling the saw
greatly reduces the risk of accidentally touching the sharp cutting chain.
9. Keep the handles dry, clean and free from gas, oil and grease. Slippery handles may lead to a loss
of control.
10. Remain alert; pay attention to what you are doing and proceed sensibly when working with an elec-
tric tool. Do not use the machine if you are tired or under the influence of drugs, alcohol or medication.
11. Inspect the saw thoroughly before use for damage. If any parts or pieces appear to be missing or
damaged, do not operate the saw.
12. Do not operate during adverse weather conditions, particularly during lightening and rain. This
decreases the risk of being struck by lightning.
WARNING: Do not operate near electrical power lines. The pole saw has not been designed
to provide protection from electric shock from contact with power lines. Contact with or use near
power lines may cause serious injury, electric shock, or death.
To Next Page
Loading...
Need help?
General
