Model Number 40421, 40421BT
Motor 40V Brushless Motor
Guide Bar 10 inch
Speed (no-load) 4800 RPM
Maximum Reach 10 feet
Oil Tank Capacity 3.4 ounces
Saw Chain Model 91PJ040X
Guide Bar Model 100SDEA041
Chain Pitch 3/8 inch
Chain Gauge 1/2 inch
Drive Links 40
Battery 40V Max Lithium Ion, 2Ah
Charger Input 100-120V AC, 60Hz, 100W
Charger Output 42V DC, 2A
Battery Model 40401
Charger Model 40400C
Weight with Battery 12 pounds
Product Dimensions
Extended 111 x 5.1 x 6.3 inches
Shortened 77 x 5.1 x 6.3 inches
3
SPECIFICATIONS
INTRODUCTION
Thanks for purchasing the WEN Pole Saw. We know you are excited to put your tool to work, but first, please take
a moment to read through the manual. Safe operation of this tool requires that you read and understand this op-
erator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. The safety symbols and the explanations
with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the
risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not
substitutes for proper accident prevention measures.
NOTE: Model 40421BT does not include battery or charger.
To Next Page
Loading...
Need help?
General
