19
ENGLISH
4.10 Observance of the operating instructions
Operating instructions are enclosed by the manufac-
turer or supplier of the product to provide the user
/ operator with essential knowledge for proper and
safe use and to point out dangers when handling the
machine.
Before commissioning the machine, the operating instructions must be
read and carefully observed. We would like to point out that we accept
no liability for damage and operational faults resulting from failure to
observe the operating instructions.
We reserve the right to make technical changes to the illustrations and
information in these operating instructions which are necessary to im-
prove the machine.
4.11 Residual dangers and protective measures
The knowledge and technical implementation of the safety instructions
contained in this documentation is a prerequisite for a fault-free prod-
uct. However, this documentation cannot cover all details of every con-
ceivable case of machine use. Therefore, as in any other case, a residual
risk remains, in particular due to human error. This residual risk should
be kept to a minimum by this documentation.
4.12 Safety signs on the machine
Danger and warning signs as well as important informa-
tion must be clearly marked on the machine and must be
cleaned or replaced if they become dirty or unrecognisa-
ble.
NOTICE
4 Safety
To Next Page
Loading...