32
ENGLISH
11 Maintenance and servicing
11.7 Measures after maintenance
After completing all maintenance work, perform the following steps:
• Make sure that all previously loosened bolts are tightened.
• Make sure that all previously removed safety devices and covers are
properly reinstalled.
• Make sure that all tools, materials and other equipment that have
been used are removed from the working area.
• Clean the working area, and remove cleaning materials such as
cleaning rags etc.
• Make sure that all safety devices function properly.
11.8 Note on servicing work
Only original spare parts may be used for servicing
work and components replaced for this reason.
11.9 List of records
Events and interventions must be recorded in a list of
records.Thelistsofrecordsmustbeleddigitally
and/or in paper form.
NOTICE
NOTICE
To Next Page
Loading...