CP600 Pivot Operation Manual
POM-EN-December 2018
8
Winterization see manufacturers specications Section 9-24.
CAUTION: Hard hat and steel toe work boots recommended when assembling equip-
ment
CAUTION: Be aware of pinch points when assembling equipment.
CAUTION: Could cause minor injury and or damage to machinery equipment, compo-
nents, product, etc.,
Note: Manufacture’s general comment, recommendation or instruction.
Lock Out / Tag Out Manufacturer recommends locking the main power disconnect
before servicing or troubleshooting electrical components. See
CAUTION or WARNING Disconnect electrical power prior to servicing or troubleshoot-
ing components.
WARNING: DO NOT ATTEMPT TO ASSEMBLE OR TROUBLESHOOT MACHIN-
ERY IF THERE IS POTENTIAL FOR A LIGHTENING STORM. COMPONENTS ARE
HIGHLY CONDUCTIVE AND SERIOUS INJURY OR POSSIBLE DEATH MAY OC-
CUR IF STRUCK BY LIGHTENING.
DANGER: DO NOT IRRIGATE NEXT TO POWER LINES. SPRAYING WATER ON
POWER LINES COULD CAUSE SERIOUS INJURY OR DEATH.
Section 1-4
Operation, Safety & Maintenance
Safety Symbols, Pictures and Definitions
To Next Page
Loading...