Wfly WFT09 - (16). V-TAIL

(16). V-TAIL
V-TAIL mixing is used with v-tail aircraft so that both elevator
and rudder functions are combined for the two tail surfaces.
Both elevator and rudder travel can be adjusted independently
on each surface.
Setting Method:
Use up/down button to select V-TAIL, OK button is to
enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to set value. Press OK button for seconds can
back default.
3. Press EXIT after setting.
WFT09
INSTRUCTION
93
AIRPLANE