Wfly WFT09 - Trainer Functionality; Trainer Function Setting Method

Trainer function
Two WFT09 transmitters can transfer data and realize trainer function.
Setting Method:
1).Data transfer function: use Trainer cable/Data transfer cable to
connect two WFT09 transmitter.
Select “Send data/receive data” in SYS setting to transfer the data.
2).Trainer function: use Trainer cable/Data transfer cable to connect
two WFT09 transmitters.
Insert RF module to the trainer transmitter, student transmitter
doesn’t insert the RF module.
Pull Trainer switch for student transmitter operating. If any wrong
operation occurs, trainer pushes trainer switch and student
transmitter stops sending signal, trainer transmitter controls the
aircraft.
WFT09
INSTRUCTION
06