(21). THROTTLE NEEDLE MIXING
Throttle needle is a pre-programmed mix that automatically
moves an in-flight mixture servo in response to the Throttle
Stick imputs for perfect engine tuning at all throttle settings.
This function is particularly popular with contest pilots who fly
in a large variety of locations, needing regular engine tuning
adjustments, and requiring perfect engine response at all times
and in all maneuvers. Also popular to minimize flooding at idle
of inverted engine installations or installations with a high tank
position. Not need for fuel injection engine, which do this
automatically.
Setting Method
Use up/down button to select Throttle needle mixing, OK
button is to enter editing.
Steps:
1. Use +/- button to active or inhibit this function.
2. Use +/- button to select one curve. There’re 3 curves,
NORM, IDLE1, IDLE2, IDLE3.
3. Use direction button to select “D/R”
Edit one or two parameter.
+/- buttons can increase or decrease the value.
Press the OK button is to back default.
4. Use direction button to select “EX”
Edit one or two parameter.
+/- buttons can increase or decrease the value.
Press the OK button is to back default.
EX can adjust aileron, throttle, rudder sensitivity when the
sticks are around the middle.
There are a lot of mixes when “D/R” and “EX” come together.
5. Curve setting method please refer to page 25.
WFT09
INSTRUCTION
54
HELICOPTER
To Next Page
Loading...
