(7). GOVERNOR MIXING
This function is to set the governor.
The Governor mixing function is used to adjust the Governor
speed settings from the transmitter.
Setting Method:
Use up/down button to select Governor mixing, OK button is
to enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to active or inhibit “Mix”.
3. Use +/- button to set the mix rate “Rate”. Press OK button
for seconds can back default.
4. Use +/- button to set the control switch “CTRL“.
5. Use +/- button to set the channel and its direction.
6. Press EXIT after setting.
WFT09
INSTRUCTION
50
HELICOPTER
To Next Page
Loading...
