Wfly WFT09 - Page 4

5. Sub trim---------------------------------------------------------------28
6. Swash param setting----------------------------------------------- 29
7. Auxiliary channels setting----------------------------------------- 30
8. Throttle curve setting----------------------------------------------- 31
9. Pitch curve setting-------------------------------------------------- 33
10. Revolution mixing-------------------------------------------------- 35
11. Trim step setting--------------------------------------------------- 36
12. Throttle cut setting------------------------------------------------- 37
13. Fly model switch--------------------------------------------------- 38
14. Throttle holding setting--------------------------------------------39
15. Fail safe--------------------------------------------------------------40
16. TIMER----------------------------------------------------------------41
18. Language------------------------------------------------------------42
(1). GYRO sens setting--------------------------------------------44
(2). Throttle hovering setting------------------------------------- 45
(3). Pitch hovering setting---------------------------------------- 46
(4). HI/LO PIT Setting--------------------------------------------- 47
(5). Trim offset setting--------------------------------------------- 48
(6). DELAY----------------------------------------------------------- 49
(7). Governor mixing----------------------------------------------- 50
(8). Swash and THR mixing--------------------------------------- 51
(9). Cuve setting---------------------------------------------------- 51
(10). PROG.NOR.MIX1-7----------------------------------------- 52
(11). PROG.CUR.MIX1-4----------------------------------------- 53
(12). Throttle needle mixing-------------------------------------- 54
WFT09
INSTRUCTION
II
ADVANCED