WFT09
INSTRUCTION
Adjustable travel limit (ATL) makes throttle trim effective only at
low throttle, disabling the trim at high throttle. This prevents
pushrod jamming due to idling trim changes. This function defaults
to ON. If you are not using channel 3 for throttle, you may want trim
operation the same as on all other channels. To do so, set ATL to
OFF.
Setting Method:
Press Menu and turn on the transmitter to enter “SYS SETTING”
Use up/down button to select “ATL”, OK button is to enter editing.
Steps:
1. Use direction buttons to select the editing part.
2. Press +/- button to set ATL function.
3. Press EXIT after setting.
4. ATL
60
AIRPLANE
To Next Page
Loading...
