14. IDLE DOWN
This function is to lowers the engine idle for: sitting on the run-
way prior to take off, stalls and spins, and landings. The normal
idle setting is a little higher for easier starts and safe flights with
less risk of dead sticks.
The idle down function is not normally used when starting the
engine, and its accidental operation may keep your engine from
starting.
Setting Method:
Use up/down button to select IDLE DOWN, OK button is to
enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to set value. Press OK button for seconds can
back default.
3. Press EXIT after setting.
WFT09
INSTRUCTION
82
AIRPLANE
To Next Page
Loading...
