(2)-(8). PROG. NOR. MIX1-7
The mix program is to adjust the flying pose. There are 7series
programs with the same setting method. You can set one mix
and one mix with another one mix.
Setting Method
Use up/down button to select PROG. NOR. MIX, OK button is
to enter editing.
Steps:
1. Use direction buttons to select editing part. Set any two
channels mix.
2. Use +/- button to active or inhibit “Mix”.
3. Use +/- button to active or inhibit “Link” and “TRIM”.
4. Use +/- button to active or inhibit “CTRL“.
5. Use +/- button to set the control switch position.
6. Press EXIT after setting.
88
WFT09
INSTRUCTION
AIRPLANE
To Next Page
Loading...
