(13). AIR BRAKE
AIR BRAKE simultaneously moves the flaps, twin ailerons
and elevators, and is usually used to make steep descents or
to limit increases in airspeed in dives.
Setting Method:
Use up/down button to select AIR BRAKE, OK button
is to enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to active or inhibit āMixā.
3. Use +/- button to set Swit, POSI. Press OK button for seconds
can back default.
4. Use +/- button to set CTRL (MAN/ THR).
5. Use +/- button to set delay value. Press OK button for seconds
can back default.
6. Press EXIT after setting.
WFT09
INSTRUCTION
90
AIRPLANE
To Next Page
Loading...
