WHEATON
®
OmniSpense
®
ELITE Peristaltic Pump
WHEATON | 800.225.1437 (U.S. & Canada Only) | 856.825.1100 | www.wheaton.com | P/N 50099067 Rev. 5/15/12 WMAN_001
10.3 Calibration Dispense
11.0 Making Batch and Single Dose Dispenses
11.1 Flow Rate
11.2 Batch Count
11.3 Volume per Dispense
11.4 Delay Between Dispenses
11.5 Drawback Function
11.6 Soft Start / Ramping
11.7 Making a Dispense
11.8 To Adjust the Volume During a Batch Dispense
11.9 To Run Additional Batches with the Same Settings
12.0 Constant Flow Rate Dispensing
12.1 Constant Flow Rate
12.2 Soft Start / Ramping
12.3 Changing Flow Rate On-The-Fly
13.0 Working with Alternate Pump Head Setups
13.1 Multiple Pump Heads
13.2 Working with the Microcassette Pump Head
14.0 Memory Storage and Recall
14.1 To Store a Parameter
14.2 To Recall a Parameter
15.0 Tips for Obtaining Maximum Accuracy
15.1 Proper Tubing Selection
15.2 Selection of Ramp Rates
15.3 Using Multiple Pump Heads
16.0 Maintenance and Troubleshooting
16.1 Maintenance
16.2 Troubleshooting – For Qualified Maintenance Personnel Only
16.3 Fuse Replacement
17.0 Illustrations and Diagrams
18.0 Declarations of Conformity and WEEE Statement
To Next Page
Loading...
