Williams Rhapsody - Assembly; Check Package Contents; Install the Pedal Cross Bar; Install the Back Board

4
Piano Body Slide back
brackets
over buttons
Check Package
Contents:
Please follow these instructions to safely assemble your piano in just a few short moments.
Tool required: Phillips screwdriver.
ASSEMBLY
Plug in
Pedal Cable
Plug in the
DC Power
Adaptor
Now that the piano is fully assembled, make sure to read the following user’s manual to get the most enjoyment
from your new Williams piano.
1
Back Board
Install the Back Board
Sideboard (Left) Sideboard (Right)
Install the Pedal
Cross Bar
Attach the Piano Body
Four large screws
(M6x20)
A
Four small screws
(M4 x 16)
D
Two medium screws
(M4 x 10)
C
Two medium screws
(M6 x 16)
B
2
3
4
5 6