General en-US
Installation and operating instructions Wilo-Rexa UNI 5
1 General
1.1 About this manual
The 'Installation and operating instructions' are an inte-
gral part of the product. Read these instructions before
all activities and keep them accessible at all times.
Strict observance of these instructions is a prerequisite
for the intended use and correct handling of the prod-
uct. Observe all information and markings on the prod-
uct.
The language of the original operating instructions is
German. All other languages of these instructions are
translations of the original operating instructions.
1.2 Copyright
These 'Installation and operating instructions' have
been copyrighted by the manufacturer. The content, of
any kind, may not be reproduced, distributed or used
for any competitive purpose without authorization and
handed to third parties.
1.3 Subject to changes
The manufacturer reserves the right to make technical
modifications to the product or individual components.
Illustrations used may differ from the original and serve
only as example illustrations of the product.
1.4 Warranty
For the warranty and warranty period the specifications
according to the current “General Terms and Condi-
tions” apply. You can find these here: www.wilo.com/
legal
Any deviations must be contractually agreed and shall
then be given priority.
Warranty
If the following points have been adhered to, the man-
ufacturer is obliged to repair any qualitative or con-
structive defects:
▪The defects were reported in writing to the manufac-
turer within the warranty period.
▪Application according to intended use.
▪All monitoring devices are connected and were checked
before commissioning.
Disclaimer
A disclaimer rules out any responsibility for personal in-
jury, material damage or financial losses. This exclusion
of liability follows as soon as one of the following
points applies:
▪Inadequate configuration due to unsatisfactory or false
information from the operator or employer
▪Non-compliance with the 'Installation and operating
instructions'
▪Improper use
▪Improper storage or transport
▪Faulty installation or dismantling
▪Insufficient or incorrect maintenance
▪Unauthorized repairs
▪Unsatisfactory building site
▪Chemical, electrical or electrochemical influences
▪Wear
2 Safety
This section contains basic indications which must be
observed during the individual phases of life. The viola-
tion of these 'Installation and operating instructions'
endangers people, the environment as well as the
product as a consequence and leads to the loss of any
damages claims. A violation may bring about the fol-
lowing dangers:
▪Danger to persons due to electrical, mechanical and
bacteriological effects as well as electromagnetic fields
▪Danger to the environment due to leakage of haz-
ardous substances
▪Material damage
▪Failure of important functions of the product
In addition, observe the instructions and safety in-
structions in the following sections!
2.1 Identification of safety instructions
In these 'Installation and operating instructions', safety
instructions are used for material damage and personal
injury. These safety instructions are illustrated differ-
ently:
▪Safety instructions for personal injury start with a signal
word, have a corresponding prefixed symbol and are
grayed out.
DANGER
Type and source of the danger!
Impacts of the danger and instructions for preven-
tion.
▪Safety instructions for material damage start with a
signal word and are illustrated without a symbol.
CAUTION
Type and source of the danger!
Impacts or information.
To Next Page
Loading...
Need help?
General
