Need help?Do you have a question about the Wilo Rexa UNI Series and is the answer not in the manual?
General| Protection Class | IP68 |
|---|---|
| Series | UNI |
| Category | Submersible Pump |
| Type | Submersible pump |
| Application | Drainage, sewage, wastewater |
| Hydraulic Type | vortex impeller |
| Fluid Temperature | 3 ... 40 °C |
| Operating Mode | S1 (Continuous Operation) |
| Installation Type | Submersible |
| Impeller Type | Vortex Impeller |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Material | Cast Iron |
Specifies that electrical work must be performed by a qualified electrician, adhering to local regulations.
Details safety precautions and required protective equipment for installation and dismantling procedures.
Safety guidelines for operating the pump, including keeping the work area clear and reporting faults.
Critical safety information and procedures for connecting the pump to the electrical power supply.
Requirements for personnel qualified to perform commissioning operations, covering electrical and control aspects.
Critical safety warning regarding the severe risk of electrocution from improper electrical work.
Warning against performing potentially hazardous work alone, emphasizing the need for a second person.
To Next Page