Wilo VT - Data Plate; 4 Product Information; Standard Product Range

Installation and operating instructions WILO Mather and Platt – VT pumps 20
4. Product information
4.1 Data plate
4.1.1 Key Type:
CNE 18 x 2 / 1480 / C.W
30 VMF x 3 / 740 / A.C.W
CNE
Name of the ran g e
VMF
Name of the ran g e
2/3
No of stages
1480/
740
Speed in RPM
CW/
ACW
Direction of Rotation when viewed from top
4.2 Standard product range
The technical features of the product have been
described in the offer made for this product, especially
the fluid compatibility.
Please refer to this:
Property Value Remarks
Spe e d
2900, 1800, 1480, 980, 740, 590, 490,
420, 390, 330 Rev/m i n
Model dependent
Discharge nominal diameters DN
100 mm to 2000 mm
Model dependent
Flange standard
ANSI
Others on request
Limits of ambient temperature (min/max) [°C]
up to +40
Others on request
Ambient humidit y
< 90 %
Others on request
Max. operating pressure
on request
Model dependent
Motor i n s ulat i on class
F
Other on request
Motor protection level
IP 55
Electrical protection for mot o r
–
required in place
(in accord ance with local regulation)
Aco u st i c pressure level, (In accordance with
motor performances)
Refer to the data plate on t h e motor
or in technical leaf lets
Standard fluid allowed
Condensate, Cooling water,
Clear Water, Raw Water.
Contact WILO Mather Platt for all
other fluids
Standard version
Electrical c onn ec tion s
3~230V, 50Hz
3~415V, 50Hz
Other frequency, voltages,
Please contact M+P