Windhager BioWIN - InfoWINplus Basic Settings

36
4. For the Service Technician
4.7 InfoWINplus basic settings
Information!
Only trained service personnel may perform modifications in the basic settings.
The display switches to the basic settings when „Version ....“
(Fig. 114) is displayed and the button (shown in Fig. 114) is
pressed for 5 seconds.
„Version ...“ is displayed,
– if the „R“ button is pressed for 5 seconds on a standard
display – Fig. 113;
– if the InfoWINplus was de-energised and then switched
on.
The following settings are available in the basic settings:
– Language selection
– Boiler
– MB
– SMS
Fig. 113
Boiler temperature
(Operating phases)
Info Menu
42
°C
Fig. 114
Version V2.00
16.3.2012
Press for
5 seconds
The basic settings are used to
– set whether the InfoWINplus controls a wood or pellet boiler or whether it is solely used as master operation;
– switch the master operation functions on and off;
– activate/deactivate remote switching by text message.
The basic settings are undertaken in the factory before delivery as per the order.
Fig. 115
Language selection Deutsch
Boiler No
MB No
SMS No
Choose Back