21
Operations
To Stop Vacuuming
1. Remove foot from throttle pedal allowing pedal to
return to neutral.
2. Turn machine power off or switch to transport only
mode.
FOR SAFETY: Before leaving or servicing machine:
stop on level surface, turn off machine and remove key.
FOR SAFETY: When using machine, go slow on
inclines.
Changing Vacuum Bag
A convenient bag storage strap is located on the
underside of the lid.
1. Park machine on level area.
2. Turn the machine power off.
3. Open cover lid.
4. Remove vacuum bag lip from nozzle.
5. Remove vacuum bag from vacuum box and
dispose of properly.
6. Clean vacuum box and remove any debris.
7. Retrieve a new clean vacuum bag from the storage
strap on the cover lid.
8. Place a new vacuum bag in the vacuum box and
push the lip over the nozzle.
9. Close lid.
Debris Tray Removal
1. Release the debris tray spring clip.
2. Slide the debris tray away from machine.
Debris Tray Installation
1. Slide the debris tray into the debris tray mount
notch.
2. Secure with debris tray spring clip.
8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp
To Next Page
Loading...
Need help?
General
