47
Maintenance
Controller Fault Codes
ERROR CODE
DELUXE
PROBLEM SOLUTION
TRACTION MOTOR AND
CONTROLLER ERROR
THE BATTERY NEEDS CHARGING OR THERE IS A BAD
CONNECTION FROM THE BATTERY TO THE TRACTION
CONTROLLER. CHARGE BATTERY OR CALL FOR SERVICE
AND HAVE TECHNICIAN CHECK WIRING.
TRACTION MOTOR
DISCONNECTED
THE TRACTION MOTOR HAS A BAD CONNECTION. CALL
FOR SERVICE AND HAVE TECHNICIAN CHECK WIRING.
TRACTION MOTOR SHORT
CIRCUIT
THE TRACTION MOTOR HAS A SHORT CIRCUIT TO THE
BATTERY. CALL FOR SERVICE AND HAVE TECHNICIAN
CHECK FOR SHORT CIRCUIT.
AUX FAULT or
DECK ACTUATOR
OVERCURRENT
CALL FOR SERVICE AND HAVE TECHNICIAN CHECK AUX
OUTPUT DEVICES AND ASSOCIATED WIRING.
VACUUM MOTOR TRIP
THE VACUUM MOTOR HAS EXCESSIVE CURRENT. CALL
FOR SERVICE AND HAVE TECHNICIAN CHECK FOR SHORT
CIRCUIT OR OTHER DAMAGE.
BRUSH MOTOR TRIP
THE BRUSH MOTOR HAS EXCESSIVE CURRENT, CALL FOR
SERVICE AND HAVE TECHNICIAN CHECK FOR SHORT
CIRCUITS, PADS OR OTHER DAMAGE.
THROTTLE TRIP ERROR
THE THROTTLE IS DEFLECTED OR ASSOCIATED WIRING
HAS A BREAK OR SHORT CIRCUIT. CALL FOR SERVICE AND
HAVE TECHNICIAN CHECK THROTTLE AND ASSOCIATED
WIRING.
CONTROL SYSTEM TRIP
THE TRACTION CONTROL SYSTEM IS IN ERROR. CALL FOR
SERVICE AND HAVE TECHNICIAN CHECK ALL
CONNECTIONS TO THE CONTROLLER.
SOLENOID BRAKE
THE BRAKE SOLENOID HAS A BAD CONNECTION. CALL FOR
SERVICE AND HAVE TECHNICIAN CHECK CONNECTIONS
TO THE BRAKE.
HIGH BATTERY VOLTAGE
EXCESSIVE BATTERY VOLTAGE, CALL FOR SERVICE AND
HAVE TECHNICIAN CHECK BATTERY CONDITION.
MACHINE IS NOT REPORTING
TO KÄRCHER FLEET
MACHINES WITH KÄRCHER FLEET SUPPORT, CALL FOR
SERVICE.
MACHINES WITHOUT KÄRCHER FLEET SUPPORT, NO
ACTION REQUIRED
.
8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp
To Next Page
Loading...
Need help?
General
