46
Maintenance
Troubleshooting
PROBLEM CAUSE SOLUTION
Poor brushing performance Debris caught in brushes Remove debris
Worn brushes Replace brushes
Low battery charge Charge batteries
Brush deck goes down, then
raises
Faulty actuator circuit or actuator
Check wire connections and actuator,
replace or tighten as necessary.
Debris tray needs to be emptied
too frequently
Excessive amounts of large or heavy
material on floor.
Remove debris tray insert
New carpet Remove debris tray insert
8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp
To Next Page
Loading...
